Skip to main content

How loud is it?

What can you hear through a "normal" wall?

The average American home built after the 1940s probably uses gypsum board nailed onto wood studs over a hollow enclosure.

The STC rating for that setup is 30 decibels. According to this chart, normal conversation is still audible through a 30 STC wall. That should be no surprise to some of you apartment dwellers.

A single sheet of 5/8" drywall with fiberglass insulation provides an STC of about 40. You can still hear loud speech through this setup. If you use Roxul batts, you increase that STC rating to about 45.

If you use a soundproof drywall (like QuietRock) and insulation, you increase the coverage to 50 STC.  Double drywall with Green Glue inbetween, plus Roxul insulation increases it to 56 STC. You can read about this at the Welk and Sons Drywall site.

The cost difference is noticeable: 5/8-inch "dampened" dry wall is about $80 per sheet compared to $10, but might prevent you from having to do more sound construction later.

These blog posts from Mason Chang tell his story of soundproofing an apartment and building a new wall. Let's hope it brought him lots of peace and quiet!



Comments

  1. UnknownDecember 26, 2016 at 3:11 AM

    Soundproofing wall panel service is most widely used technique to control the annoying and unwanted sounds but is gives desired results when you choose the right material for soundproofing after analyzing your precise needs. Soundproofing Solutions

    ReplyDelete

Post a Comment

Popular posts from this blog

Blow-in cellulose and your hollow walls

It's not too late to insulate.  A few years ago, most American homes had no insulation in them. When a homeowner did insulate, it was usually with fiberglass batts. Then along came some better products. One of them is blow-in cellulose insulation. Does it work? I can attest to this: YES. I've used it in walls and ceilings, and it works quite well for airborne noise. If you live in an uninsulated home and you hear your neighbors voices coming through your walls or ceilings, cellulose will dampen that noise or mute it entirely. It doesn't work for all types of noise. But it doesn't eradicate impact noise. You might still hear the sounds of someone walking across a bare hardwood floor with their shoes on, for example, or hear wall-mounted cabinets opening and closing. There are other solutions for that, and by combining different solutions you can control most structural noise and create more privacy. Low cost Blow-in insulation is inexpensive. You can hire a
Post a Comment
Read more

Combining QuietRock and Green Glue together

Two great products work great together. As I've mentioned before, I'm experimenting around with ways to reduce some of the noise problems in my apartment on a tight budget. I think I've found the best combination to date: adding a layer of QuietRock 510 over an existing layer of gypsum drywall with a layer of Green Glue inbetween. This was sort of the best of both worlds: taking a pre-made, sound-dampened drywall and then adding it over a powerful, viscous layer of glue....onto drywall that was already on the wall studs. No demo needed. In this project, I basically added two sound-dampening layers to the original 1950s drywall (one layer in the QuietRock and the other layer created by the Green Glue) to address " flanking noise ": feet, furniture, and shoes pounding on the bare floor of my downstairs neighbors' apartment. The amount of banging, bashing, and foot-stomping sounds coming from their very "wooden" apartment has been severe, and I&
10 comments
Read more

How to measure decibels and frequency with the Decibel Meter app

 Frequency matters When you're dealing with a noise issue, the frequency of that noise is just as important as the decibel level. A decibel is the loudness of the sound, and measuring decibels can alert you when a sound is more than just a nuisance, but dangerous to your health. However, decibel levels on their own don't tell the whole story. The frequency of the sound is also very important. The frequency is a measure of how many sound waves per second are produced by a sound, and determines its pitch. A low-frequency sound might be really annoying, but it might not be that loud. The lower frequencies are typically below 150 Hz, and often sound like a deep bass sound that's not necessarily loud, but the vibrations from that sound can travel through the entire frame of a building and disrupt sleep or cause stress. Knowing both the decibel level and the frequency of an unwanted sound can help you determine the right soundproofing solution. For example, a low-frequency nois
Post a Comment
Read more